 |
VK-NB
VIROCK
Processing of the machine:
A frame fabric entry --- Tension sensor --- Lower overfeeding --- Upper overfeeding --- Fabric supporting board --- Edge detecting --- Pinning-on --- Chamber for heat setting --- Air cooling --- Pinning-off --- Exit frame --- Tension applicator --- A frame batching.
2. Main technical data:
| Fabric working width | 1000mm-3600mm |
| Machine roller width | 1200mm-3800mm |
| Type of Padding mangle | Finishing or Dyeing padder |
| Padding roll quantity | Two or Three |
| The padding roll dia | 300mm |
| Dryer quantity | 2-15 pcs |
| Guiding roll diameter | 125mm/150mm |
| Heating source | Thermal oil/Natural gas/Steam/Electricity or any two combined |
| Installation power | It depends |
| Blower motor quantity in each chamber | 2 or 4pcs |
| Exhaust fan | Two, Three or Four, it depends on the request |
3. Main feather of the chambers:
Each chamber is 3 meters long, equipped with two gas burners and 4 circulation motors, each motor capacity is 5.5 Kw..
Each chamber is equipped with electric heating device.
Chamber equipped with temperature detecting device: temperature sensor probe (PT100). Each chamber has an independent temperature control device, the temperature deviation degree is +/-1℃.
Processing of the machine:
A frame fabric entry --- Tension sensor --- Lower overfeeding --- Upper overfeeding --- Fabric supporting board --- Edge detecting --- Pinning-on --- Chamber for heat setting --- Air cooling --- Pinning-off --- Exit frame --- Tension applicator --- A frame batching.
2. Main technical data:
| Fabric working width | 1000mm-3600mm |
| Machine roller width | 1200mm-3800mm |
| Type of Padding mangle | Finishing or Dyeing padder |
| Padding roll quantity | Two or Three |
| The padding roll dia | 300mm |
| Dryer quantity | 2-15 pcs |
| Guiding roll diameter | 125mm/150mm |
| Heating source | Thermal oil/Natural gas/Steam/Electricity or any two combined |
| Installation power | It depends |
| Blower motor quantity in each chamber | 2 or 4pcs |
| Exhaust fan | Two, Three or Four, it depends on the request |
3. Main feather of the chambers:
Each chamber is 3 meters long, equipped with two gas burners and 4 circulation motors, each motor capacity is 5.5 Kw..
Each chamber is equipped with electric heating device.
Chamber equipped with temperature detecting device: temperature sensor probe (PT100). Each chamber has an independent temperature control device, the temperature deviation degree is +/-1℃.
